Coffee Queen NORDIC User Manual download pdf (Page 12)

12.

Handling and cleaning instructions Nordic

1. Open the Bag-in-Box at the perforation. Pull out the

silicon tube and the plastic connector, so it is clear of the

box.

2. Place the box inside the dispenser. Press in the pinch

solenoid and slide the tube in to the opening. (Fig 2)

3. Push the tube onto the ejector nozzle. (Fig3)

4. The dispenser is now ready to use.

1. When changing the Bag-in-Box, the dispenser should

be cleaned with hot water.

2. Fill the rinsing bottle with a solution of hot water and a

sanitising agent. Add two drops of washing-up liquid.

Connect the tube to the nozzle and wash it through.

(Fig 4)

3. Wet the brush in a hot water and sterilising solution.

Clean the outlet pipes by pushing the brush all the way

through the pipe and back again. (Fig 5)

4. Rinse the pipes with the water solution from the bottle.

5. The pinch solenoid that the tube runs through should be

cleaned on a regular basis, by pouring a hot water and

sterilising solution over it. This will dissolve any residual

concentrate.

6. The air inlet (condenser) at the back of the machine should be

cleaned from dust on a regular basis by brushing or

vacuuming the grid.

Fig. 1.

Fig. 2.

Fig. 3.

Fig. 4. Fig. 5.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17

No comments

Coffee Queen NORDIC User Manual Page 12